#
# Galaxy is configured by default to be useable in a single-user development
# environment.  To tune the application for a multi-user production
# environment, see the documentation at:
#
# http://bitbucket.org/galaxy/galaxy-central/wiki/Config/ProductionServer
#

# Throughout this sample configuration file, except where stated otherwise,
# uncommented values override the default if left unset, whereas commented
# values are set to the default value.
# examples of many of these options are explained in more detail in the wiki:
#
# Config hackers are encouraged to check there before asking for help.

# ---- HTTP Server ----------------------------------------------------------

# Configuration of the internal HTTP server.

[server:main]

# The internal HTTP server to use.  Currently only Paste is provided.  This
# option is required.
use = egg:Paste#http

# The port on which to listen.
#port = 8080

# The address on which to listen.  By default, only listen to localhost (Galaxy
# will not be accessible over the network).  Use '0.0.0.0' to listen on all
# available network interfaces.
#host = 127.0.0.1

# Use a threadpool for the web server instead of creating a thread for each
# request.
use_threadpool = True

# Number of threads in the web server thread pool.
#threadpool_workers = 10

# ---- Filters --------------------------------------------------------------

# Filters sit between Galaxy and the HTTP server.

# These filters are disabled by default.  They can be enabled with
# 'filter-with' in the [app:main] section below.

# Define the gzip filter.
[filter:gzip]
use = egg:Paste#gzip

# Define the proxy-prefix filter.
[filter:proxy-prefix]
use = egg:PasteDeploy#prefix
prefix = /galaxy

# ---- Galaxy ---------------------------------------------------------------

# Configuration of the Galaxy application.

[app:main]

# -- Application and filtering

# The factory for the WSGI application.  This should not be changed.
paste.app_factory = galaxy.web.buildapp:app_factory

# If not running behind a proxy server, you may want to enable gzip compression
# to decrease the size of data transferred over the network.  If using a proxy
# server, please enable gzip compression there instead.
#filter-with = gzip

# If running behind a proxy server and Galaxy is served from a subdirectory,
# enable the proxy-prefix filter and set the prefix in the
# [filter:proxy-prefix] section above.
#filter-with = proxy-prefix

# If proxy-prefix is enabled and you're running more than one Galaxy instance
# behind one hostname, you will want to set this to the same path as the prefix
# in the filter above.  This value becomes the "path" attribute set in the
# cookie so the cookies from each instance will not clobber each other.
#cookie_path = None

# -- Database

# By default, Galaxy uses a SQLite database at 'database/universe.sqlite'.  You
# may use a SQLAlchemy connection string to specify an external database
# instead.  This string takes many options which are explained in detail in the
# config file documentation.
#database_connection = sqlite:///./database/universe.sqlite?isolation_level=IMMEDIATE

# If the server logs errors about not having enough database pool connections,
# you will want to increase these values, or consider running more Galaxy
# processes.
#database_engine_option_pool_size = 5
#database_engine_option_max_overflow = 10

# If using MySQL and the server logs the error "MySQL server has gone away",
# you will want to set this to some positive value (7200 should work).
#database_engine_option_pool_recycle = -1

# If large database query results are causing memory or response time issues in
# the Galaxy process, leave the result on the server instead.  This option is
# only available for PostgreSQL and is highly recommended.
#database_engine_option_server_side_cursors = False

# Create only one connection to the database per thread, to reduce the
# connection overhead.  Recommended when not using SQLite:
#database_engine_option_strategy = threadlocal

# -- Files and directories

# Dataset files are stored in this directory.
#file_path = database/files

# Temporary files are stored in this directory.
#new_file_path = database/tmp

# Tool config file, defines what tools are available in Galaxy.
#tool_config_file = tool_conf.xml

# Path to the directory containing the tools defined in the config.
#tool_path = tools

# Directory where data used by tools is located, see the samples in that
# directory and the wiki for help:
# http://bitbucket.org/galaxy/galaxy-central/wiki/DataIntegration
#tool_data_path = tool-data

# Datatypes config file, defines what data (file) types are available in
# Galaxy.
#datatypes_config_file = datatypes_conf.xml

# -- Mail and notification

# Galaxy sends mail for various things: Subscribing users to the mailing list
# if they request it, emailing password resets, notification from the Galaxy
# Sample Tracking system, and reporting dataset errors.  To do this, it needs
# to send mail through an SMTP server, which you may define here.
#smtp_server = None

# On the user registration form, users may choose to join the mailing list.
# This is the address of the list they'll be subscribed to.
#mailing_join_addr = galaxy-user-join@bx.psu.edu

# Datasets in an error state include a link to report the error.  Those reports
# will be sent to this address.  Error reports are disabled if no address is set.
#error_email_to = None

# -- Display sites

# Galaxy can display data at various external browsers.  These options specify
# which browsers should be available.  URLs and builds available at these
# browsers are defined in the specifield files.

# UCSC browsers: tool-data/shared/ucsc/ucsc_build_sites.txt
#ucsc_display_sites = main,test,archaea,ucla

# GBrowse servers: tool-data/shared/gbrowse/gbrowse_build_sites.txt
#gbrowse_display_sites = wormbase,tair,modencode_worm,modencode_fly

# GeneTrack servers: tool-data/shared/genetrack/genetrack_sites.txt
#genetrack_display_sites = main,test

# -- UI Localization

# Append "/{brand}" to the "Galaxy" text in the masthead.
#brand = None

# The URL linked by the "Galaxy/brand" text.
#logo_url = /

# The URL linked by the "Galaxy Wiki" link in the "Help" menu.
#wiki_url = http://bitbucket.org/galaxy/galaxy-central/wiki

# The URL linked by the "Email comments..." link in the "Help" menu.
#bugs_email = None

# The URL linked by the "How to Cite..." link in the "Help" menu.
#citation_url = http://bitbucket.org/galaxy/galaxy-central/wiki/Citations

# Serve static content, which must be enabled if you're not serving it via a
# proxy server.  These options should be self explanatory and so are not
# documented individually.  You can use these paths (or ones in the proxy
# server) to point to your own styles.
static_enabled = True
static_cache_time = 360
static_dir = %(here)s/static/
static_images_dir = %(here)s/static/images
static_favicon_dir = %(here)s/static/favicon.ico
static_scripts_dir = %(here)s/static/scripts/
static_style_dir = %(here)s/static/june_2007_style/blue

# -- Logging and Debugging

# Verbosity of console log messages.  Acceptable values can be found here:
# http://docs.python.org/library/logging.html#logging-levels
#log_level = DEBUG

# Print database operations to the server log (warning, quite verbose!).
#database_engine_option_echo = False

# Print database pool operations to the server log (warning, quite verbose!).
#database_engine_option_echo_pool = False

# Turn on logging of application events and some user events to the database.
#log_events = True

# Turn on logging of user actions to the database. Actions currently logged are
# grid views, tool searches, and use of "recently" used tools menu.  The
# log_events and log_actions functionality will eventually be merged.
#log_actions = True

# Debug enables access to various config options useful for development and
# debugging: use_lint, use_profile, use_printdebug and use_interactive.  It
# also causes the files used by PBS/SGE (submission script, output, and error)
# to remain on disk after the job is complete.  Debug mode is disabled if
# commented, but is uncommented by default in the sample config.
debug = True

# Check for WSGI compliance.
#use_lint = False

# Run the Python profiler on each request.
#use_profile = False

# Intercept print statements and show them on the returned page.
#use_printdebug = True

# Enable live debugging in your browser.  This should NEVER be enabled on a
# public site.  Enabled in the sample config for development.
use_interactive = True

# Write thread status periodically to 'heartbeat.log',  (careful, uses disk
# space rapidly!).  Useful to determine why your processes may be consuming a
# lot of CPU.
#use_heartbeat = False

# Enable the memory debugging interface (careful, negatively impacts server
# performance).
#use_memdump = False

# -- Data Libraries

# These library upload options are described in much more detail in the wiki:
# http://bitbucket.org/galaxy/galaxy-central/wiki/DataLibraries/UploadingFiles

# Add an option to the library upload form which allows administrators to
# upload a directory of files.
#library_import_dir = None

# Add an option to the library upload form which allows authorized
# non-administrators to upload a directory of files.  The configured directory
# must contain sub-directories named the same as the non-admin user's Galaxy
# login ( email ).  The non-admin user is restricted to uploading files or
# sub-directories of files contained in their directory.
#user_library_import_dir = None

# Add an option to the admin library upload tool allowing admins to paste
# filesystem paths to files and directories in a box, and these paths will be
# added to a library.  Set to True to enable.  Please note the security
# implication that this will give Galaxy Admins access to anything your Galaxy
# user has access to.
#allow_library_path_paste = False

# -- Users and Security

# Galaxy encodes various internal values when these values will be output in
# some format (for example, in a URL or cookie).  You should set a key to be
# used by the algorithm that encodes and decodes these values.  It can be any
# string.  If left unchanged, anyone could construct a cookie that would grant
# them access to others' sessions.
#id_secret = USING THE DEFAULT IS NOT SECURE!

# User authentication can be delegated to an upstream proxy server (usually
# Apache).  The upstream proxy should set a REMOTE_USER header in the request.
# Enabling remote user disables regular logins.  For more information, see:
# http://bitbucket.org/galaxy/galaxy-central/wiki/Config/ApacheProxy
#use_remote_user = False

# If use_remote_user is enabled and your external authentication
# method just returns bare usernames, set a default mail domain to be appended
# to usernames, to become your Galaxy usernames (email addresses).
#remote_user_maildomain = None

# If use_remote_user is enabled, you can set this to a URL that will log your
# users out.
#remote_user_logout_href = None

# Administrative users - set this to a comma-separated list of valid Galaxy
# users (email addresses).  These users will have access to the Admin section
# of the server, and will have access to create users, groups, roles,
# libraries, and more.  For more information, see:
# http://bitbucket.org/galaxy/galaxy-central/wiki/Admin/AdminInterface
#admin_users = None

# Force everyone to log in (disable anonymous access).
#require_login = False

# Allow unregistered users to create new accounts (otherwise, they will have to
# be created by an admin).
#allow_user_creation = True

# Allow administrators to delete accounts.
#allow_user_deletion = False

# By default, users' data will be public, but setting this to True will cause
# it to be private.  Does not affect existing users and data, only ones created
# after this option is set.  Users may still change their default back to
# public.
#new_user_dataset_access_role_default_private = False

# -- Beta features

# Enable Galaxy's built-in visualization module, Trackster.
#enable_tracks = False

# Enable Galaxy Pages. Pages are custom webpages that include embedded Galaxy items, 
# such as datasets, histories, workflows, and visualizations; pages are useful for 
# documenting and sharing multiple analyses or workflows. Pages are created using a 
# WYSIWYG editor that is very similar to a word processor.
#enable_pages = False

# Enable the (experimental! beta!) Web API.  Documentation forthcoming.
#enable_api = False

# -- Job Execution

# If running multiple Galaxy processes, one can be designated as the job
# runner.  For more information, see:
# http://bitbucket.org/galaxy/galaxy-central/wiki/Config/WebApplicationScaling
#enable_job_running = True

# Should jobs be tracked through the database, rather than in memory.
# Necessary if you're running the load balanced setup.
#track_jobs_in_database = False

# Enable job recovery (if Galaxy is restarted while cluster jobs are running,
# it can "recover" them when it starts).  This is not safe to use if you are
# running more than one Galaxy server using the same database.
#enable_job_recovery = True

# Setting metadata on job outputs to in a separate process (or if using a
# cluster, on the cluster).  Thanks to Python's Global Interpreter Lock and the
# hefty expense that setting metadata incurs, your Galaxy process may become
# unresponsive when this operation occurs internally.
#set_metadata_externally = False

# Although it is fairly reliable, setting metadata can occasionally fail.  In
# these instances, you can choose to retry setting it internally or leave it in
# a failed state (since retrying internally may cause the Galaxy process to be
# unresponsive).  If this option is set to False, the user will be given the
# option to retry externally, or set metadata manually (when possible).
#retry_metadata_internally = True

# Number of concurrent jobs to run (local job runner)
#local_job_queue_workers = 5

# Jobs can be killed after a certain amount of execution time.  Format is in
# hh:mm:ss.  Currently only implemented for PBS.
#job_walltime = None

# Clustering Galaxy is not a straightforward process and requires some
# pre-configuration.  See the the wiki before attempting to set any of these
# options:
# http://bitbucket.org/galaxy/galaxy-central/wiki/Config/Cluster

# Comma-separated list of job runners to start.  local is always started.  If
# left commented, no jobs will be run on the cluster, even if a cluster URL is
# explicitly defined in the [galaxy:tool_runners] section below.  The runners
# currently available are 'pbs' and 'drmaa'.
#start_job_runners = None

# The URL for the default runner to use when a tool doesn't explicity define a
# runner below.
#default_cluster_job_runner = local:///

# The cluster runners have their own thread pools used to prepare and finish
# jobs (so that these sometimes lengthy operations do not block normal queue
# operation).  The value here is the number of worker threads available to each
# started runner.
#cluster_job_queue_workers = 3

# These options are only used when using file staging with PBS.
#pbs_application_server = 
#pbs_stage_path = 
#pbs_dataset_server = 

# ---- Tool Job Runners -----------------------------------------------------

# Individual per-tool job runner overrides.  If not listed here, a tool will
# run with the runner defined with default_cluster_job_runner.

[galaxy:tool_runners]

biomart = local:///
encode_db1 = local:///
hbvar = local:///
microbial_import1 = local:///
ucsc_table_direct1 = local:///
ucsc_table_direct_archaea1 = local:///
ucsc_table_direct_test1 = local:///
upload1 = local:///

# ---- Galaxy Message Queue -------------------------------------------------

# Galaxy uses AMQ protocol to receive messages from external sources like 
# bar code scanners. Galaxy has been tested against RabbitMQ AMQP implementation.
# For Galaxy to receive messages from a message queue the RabbitMQ server has 
# to be set up with a user account and other parameters listed below. The 'host'
# and 'port' fields should point to where the RabbitMQ server is running. 

[galaxy_amqp]

#host = 127.0.0.1
#port = 5672
#userid = galaxy
#password = galaxy
#virtual_host = galaxy_messaging_engine
#queue = galaxy_queue
#exchange = galaxy_exchange
#routing_key = bar_code_scanner