root/galaxy-central/eggs/nose-0.11.1-py2.6.egg/nose/plugins/testid.py

リビジョン 3, 9.4 KB (コミッタ: kohda, 14 年 前)

Install Unix tools  http://hannonlab.cshl.edu/galaxy_unix_tools/galaxy.html

行番号 
1"""
2This plugin adds a test id (like #1) to each test name output. After
3you've run once to generate test ids, you can re-run individual
4tests by activating the plugin and passing the ids (with or
5without the # prefix) instead of test names.
6
7For example, if your normal test run looks like::
8
9  % nosetests -v
10  tests.test_a ... ok
11  tests.test_b ... ok
12  tests.test_c ... ok
13
14When adding ``--with-id`` you'll see::
15
16  % nosetests -v --with-id
17  #1 tests.test_a ... ok
18  #2 tests.test_b ... ok
19  #2 tests.test_c ... ok
20
21Then you can re-run individual tests by supplying just an id number::
22
23  % nosetests -v --with-id 2
24  #2 tests.test_b ... ok
25
26You can also pass multiple id numbers::
27
28  % nosetests -v --with-id 2 3
29  #2 tests.test_b ... ok
30  #3 tests.test_c ... ok
31 
32Since most shells consider '#' a special character, you can leave it out when
33specifying a test id.
34
35Note that when run without the -v switch, no special output is displayed, but
36the ids file is still written.
37
38Looping over failed tests
39-------------------------
40
41This plugin also adds a mode that will direct the test runner to record
42failed tests. Subsequent test runs will then run only the tests that failed
43last time. Activate this mode with the ``--failed`` switch::
44
45 % nosetests -v --failed
46 #1 test.test_a ... ok
47 #2 test.test_b ... ERROR
48 #3 test.test_c ... FAILED
49 #4 test.test_d ... ok
50 
51On the second run, only tests #2 and #3 will run::
52
53 % nosetests -v --failed
54 #2 test.test_b ... ERROR
55 #3 test.test_c ... FAILED
56
57As you correct errors and tests pass, they'll drop out of subsequent runs.
58
59First::
60
61 % nosetests -v --failed
62 #2 test.test_b ... ok
63 #3 test.test_c ... FAILED
64
65Second::
66
67 % nosetests -v --failed
68 #3 test.test_c ... FAILED
69
70When all tests pass, the full set will run on the next invocation.
71
72First::
73
74 % nosetests -v --failed
75 #3 test.test_c ... ok
76
77Second::
78 
79 % nosetests -v --failed
80 #1 test.test_a ... ok
81 #2 test.test_b ... ok
82 #3 test.test_c ... ok
83 #4 test.test_d ... ok
84
85.. note ::
86
87  If you expect to use ``--failed`` regularly, it's a good idea to always run
88  run using the ``--with-id`` option. This will ensure that an id file is
89  always created, allowing you to add ``--failed`` to the command line as soon
90  as you have failing tests. Otherwise, your first run using ``--failed`` will
91  (perhaps surprisingly) run *all* tests, because there won't be an id file
92  containing the record of failed tests from your previous run.
93 
94"""
95__test__ = False
96
97import logging
98import os
99from nose.plugins import Plugin
100from nose.util import src, set
101
102try:
103    from cPickle import dump, load
104except ImportError:
105    from pickle import dump, load
106
107log = logging.getLogger(__name__)
108
109
110class TestId(Plugin):
111    """
112    Activate to add a test id (like #1) to each test name output. Activate
113    with --failed to rerun failing tests only.
114    """
115    name = 'id'
116    idfile = None
117    collecting = True
118    loopOnFailed = False
119
120    def options(self, parser, env):
121        """Register commandline options.
122        """
123        Plugin.options(self, parser, env)
124        parser.add_option('--id-file', action='store', dest='testIdFile',
125                          default='.noseids', metavar="FILE",
126                          help="Store test ids found in test runs in this "
127                          "file. Default is the file .noseids in the "
128                          "working directory.")
129        parser.add_option('--failed', action='store_true',
130                          dest='failed', default=False,
131                          help="Run the tests that failed in the last "
132                          "test run.")
133
134    def configure(self, options, conf):
135        """Configure plugin.
136        """
137        Plugin.configure(self, options, conf)
138        if options.failed:
139            self.enabled = True
140            self.loopOnFailed = True
141            log.debug("Looping on failed tests")
142        self.idfile = os.path.expanduser(options.testIdFile)
143        if not os.path.isabs(self.idfile):
144            self.idfile = os.path.join(conf.workingDir, self.idfile)
145        self.id = 1
146        # Ids and tests are mirror images: ids are {id: test address} and
147        # tests are {test address: id}
148        self.ids = {}
149        self.tests = {}
150        self.failed = []
151        self.source_names = []
152        # used to track ids seen when tests is filled from
153        # loaded ids file
154        self._seen = {}
155        self._write_hashes = options.verbosity >= 2
156
157    def finalize(self, result):
158        """Save new ids file, if needed.
159        """
160        if result.wasSuccessful():
161            self.failed = []
162        if self.collecting:
163            ids = dict(zip(self.tests.values(), self.tests.keys()))
164        else:
165            ids = self.ids
166        fh = open(self.idfile, 'w')
167        dump({'ids': ids,
168              'failed': self.failed,
169              'source_names': self.source_names}, fh)
170        fh.close()
171        log.debug('Saved test ids: %s, failed %s to %s',
172                  ids, self.failed, self.idfile)
173
174    def loadTestsFromNames(self, names, module=None):
175        """Translate ids in the list of requested names into their
176        test addresses, if they are found in my dict of tests.
177        """
178        log.debug('ltfn %s %s', names, module)
179        try:
180            fh = open(self.idfile, 'r')
181            data = load(fh)
182            if 'ids' in data:
183                self.ids = data['ids']
184                self.failed = data['failed']
185                self.source_names = data['source_names']
186            else:
187                # old ids field
188                self.ids = data
189                self.failed = []
190                self.source_names = names
191            if self.ids:
192                self.id = max(self.ids) + 1
193                self.tests = dict(zip(self.ids.values(), self.ids.keys()))
194            else:
195                self.id = 1
196            log.debug(
197                'Loaded test ids %s tests %s failed %s sources %s from %s',
198                self.ids, self.tests, self.failed, self.source_names,
199                self.idfile)
200            fh.close()
201        except IOError:
202            log.debug('IO error reading %s', self.idfile)
203
204        if self.loopOnFailed and self.failed:
205            self.collecting = False
206            names = self.failed
207            self.failed = []
208        # I don't load any tests myself, only translate names like '#2'
209        # into the associated test addresses
210        translated = []
211        new_source = []
212        really_new = []
213        for name in names:
214            trans = self.tr(name)
215            if trans != name:
216                translated.append(trans)
217            else:
218                new_source.append(name)
219        # names that are not ids and that are not in the current
220        # list of source names go into the list for next time
221        if new_source:
222            new_set = set(new_source)
223            old_set = set(self.source_names)
224            log.debug("old: %s new: %s", old_set, new_set)
225            really_new = [s for s in new_source
226                          if not s in old_set]
227            if really_new:
228                # remember new sources
229                self.source_names.extend(really_new)
230            if not translated:
231                # new set of source names, no translations
232                # means "run the requested tests"
233                names = new_source
234        else:
235            # no new names to translate and add to id set
236            self.collecting = False
237        log.debug("translated: %s new sources %s names %s",
238                  translated, really_new, names)
239        return (None, translated + really_new or names)
240
241    def makeName(self, addr):
242        log.debug("Make name %s", addr)
243        filename, module, call = addr
244        if filename is not None:
245            head = src(filename)
246        else:
247            head = module
248        if call is not None:
249            return "%s:%s" % (head, call)
250        return head
251
252    def setOutputStream(self, stream):
253        """Get handle on output stream so the plugin can print id #s
254        """
255        self.stream = stream
256
257    def startTest(self, test):
258        """Maybe output an id # before the test name.
259
260        Example output::
261
262          #1 test.test ... ok
263          #2 test.test_two ... ok
264
265        """
266        adr = test.address()
267        log.debug('start test %s (%s)', adr, adr in self.tests)
268        if adr in self.tests:
269            if adr in self._seen:
270                self.write('   ')
271            else:
272                self.write('#%s ' % self.tests[adr])
273                self._seen[adr] = 1
274            return
275        self.tests[adr] = self.id
276        self.write('#%s ' % self.id)
277        self.id += 1
278
279    def afterTest(self, test):
280        # None means test never ran, False means failed/err
281        if test.passed is False:
282            try:
283                key = str(self.tests[test.address()])
284            except KeyError:
285                # never saw this test -- startTest didn't run
286                pass
287            else:
288                if key not in self.failed:
289                    self.failed.append(key)
290
291    def tr(self, name):
292        log.debug("tr '%s'", name)
293        try:
294            key = int(name.replace('#', ''))
295        except ValueError:
296            return name
297        log.debug("Got key %s", key)
298        # I'm running tests mapped from the ids file,
299        # not collecting new ones
300        if key in self.ids:
301            return self.makeName(self.ids[key])
302        return name
303
304    def write(self, output):
305        if self._write_hashes:
306            self.stream.write(output)
Note: リポジトリブラウザについてのヘルプは TracBrowser を参照してください。